UseCalcPro
Home
MathFinanceHealthConstructionAutoPetsGardenCraftsFood & BrewingToolsSportsMarineEducationTravel
Blog
  1. Home
  2. Construction

Brick Siding Cost Calculator — 2026 Thin, Full Veneer & Solid Brick

Price a 2026 brick job by veneer type (thin, full, solid), wall area, masonry labor, and region — plus the foundation-load line items most bids hide.

Home Size

sqft

Veneer & Tier

Location

Fill in the details and click Calculate

Fill in the details and click Calculate

What You'll Need

IMPRESA Vinyl Siding Removal Tool Kit 2-Pack

IMPRESA Vinyl Siding Removal Tool Kit 2-Pack

$10-$134.6
View on Amazon
Vinyl Siding Removal Tool with Extra Long Handle

Vinyl Siding Removal Tool with Extra Long Handle

$6-$94.6
View on Amazon
IMPRESA Vinyl Siding Removal Tool Kit 2-Pack

IMPRESA Vinyl Siding Removal Tool Kit 2-Pack

$10-$134.6
View on Amazon
Vinyl Siding Removal Tool with Extra Long Handle

Vinyl Siding Removal Tool with Extra Long Handle

$6-$94.6
View on Amazon

As an Amazon Associate, we earn from qualifying purchases.

Frequently Asked Questions

Q

How much does brick siding cost per square foot in 2026?

Installed brick ranges $8–$30/sqft in 2026. Thin brick veneer $8–$18/sqft; full brick veneer $13–$22/sqft; solid brick masonry $14–$30/sqft. Labor alone is $7–$10/sqft because masonry crews are constrained nationwide, especially in the Northeast and California.

  • Thin brick veneer: $8–$18/sqft installed
  • Full brick veneer: $13–$22/sqft installed
  • Solid brick masonry: $14–$30/sqft installed
  • Labor alone: $7–$10/sqft
  • Materials alone: $6–$12/sqft
Brick TypePer sqft Installed2,000 sqft Wall Total
Thin brick veneer$8–$18$16,000–$36,000
Full brick veneer$13–$22$26,000–$44,000
Solid brick (new build)$14–$30$28,000–$60,000
Q

How much to brick a 2,000 sq ft house?

Full brick veneer on a typical 2,000 sqft home (~2,000 sqft of wall surface) runs $26,000–$44,000. Thin brick veneer comes in lower at $16,000–$36,000. Solid brick pushes $30,000–$60,000+ and is only viable during new construction since it is structural.

  • 2,000 sqft thin veneer: $16,000–$36,000
  • 2,000 sqft full veneer: $26,000–$44,000
  • 2,000 sqft solid brick: $30,000–$60,000+
  • Solid brick is structural, new-build only
  • Veneer adds no load to foundation if thin
Q

What's the difference between brick veneer and solid brick?

Brick veneer is a single-wythe decorative layer over a framed wall — non-structural, added anytime. Solid brick is the structural wall itself — built during construction, costs up to 3x more, requires masonry foundation. 95%+ of modern residential is veneer; solid brick is pre-1940 or very high-end custom.

  • Veneer: decorative layer, non-structural
  • Solid brick: structural wall, built new-construction only
  • Cost gap: solid is 2–3x veneer
  • Modern residential: 95%+ veneer
  • Solid brick: pre-1940 or custom builds
Q

How much deposit is normal for a brick siding installer?

10–30% is standard. Because brick is heavy and pallet quantities are priced volatile, a 25–30% material deposit once delivery is scheduled is common — tie it to the supplier invoice. Demands for 50%+ upfront or full payment are red flags. Walk away and report to state licensing board.

  • Safe deposit: 10–30% of contract
  • Material deposit: 25–30% via supplier invoice
  • 50%+ upfront = scam signal
  • Masonry pallets priced volatile (justifies deposit)
  • Progress payment after delivery + prep
Q

Is thin brick veneer worth it vs full brick?

Thin brick veneer ($8–$18/sqft installed) saves 30–40% vs full brick and adds no foundation load — ideal for retrofit on existing wood-frame homes. Full brick veneer has slightly better thermal mass but needs a ledge or angle iron for support, which adds $500–$2,500 to the job.

  • Thin veneer savings: 30–40% vs full brick
  • Thin veneer foundation load: negligible
  • Full veneer support: brick ledge or angle iron
  • Support cost: +$500–$2,500
  • Retrofit: thin veneer almost always wins
Q

Does brick siding increase home value?

Brick homes command a 4–6% resale premium in most US metros and reduce insurance by 5–10% in wildfire and hail zones. Remodeling’s Cost vs Value reports re-brick ROI at 60–75% at resale, with the premium amplified in neighborhoods where brick is already the local norm.

  • Resale premium: 4–6%
  • Insurance discount: 5–10% in wildfire/hail zones
  • Cost vs Value ROI: 60–75%
  • Stronger in brick-heavy neighborhoods
  • Signals premium construction to appraisers

Find a Contractor Near You

Get free quotes from licensed contractors in your area

Angi
Angi4.7/5

Verified reviews & background checks

Get Free Quotes

Showing results for your area

Example Calculations

12,000 sqft thin brick veneer retrofit on Midwest home

Inputs

Wall surface2,000 sqft
VeneerThin brick veneer
Tear-offOld vinyl
Stories2
RegionMidwest

Result

Typical installed quote$22,000 – $32,000
No foundation loadThin veneer requires no ledge
Two-story surcharge+15–25% labor

Thin brick veneer is the retrofit sweet spot: brick look, no structural upgrade. Midwest masonry labor keeps this in the mid-range.

22,400 sqft full brick veneer on Northeast new build

Inputs

Wall surface2,400 sqft
VeneerFull brick veneer
Stories2
RegionNortheast

Result

Typical installed quote$34,000 – $48,000
Angle iron + brick ledge+$2,000
Northeast masonry premium+20–30%

Full brick veneer on a Northeast new build is the classic colonial look. Requires foundation ledge plus steel angle iron to support the brick weight.

31,800 sqft thin brick accent wall on Southern ranch

Inputs

Wall surface1,800 sqft (partial front + columns)
VeneerThin brick accent
Tear-offStucco
Stories1
RegionSouth

Result

Typical installed quote$15,000 – $24,000
Stucco tear-off+$2,500
Southern labor discount-10–15%

Partial brick accent (front elevation plus columns) with vinyl or fiber cement on side/rear walls is a budget-savvy curb-appeal play.

Formulas Used

Brick siding cost driver breakdown

Quote = Brick + Mortar + Labor (masonry) + Support structure + Tear-off

Brick quotes are labor-dominated because masonry is a constrained trade. Typical split: 25–35% brick+mortar, 50–60% masonry labor, 5–10% support + tear-off. Full veneer requires a brick ledge or angle iron.

Where:

Brick= Generic $2–$6/sqft material; imported handmade $8–$18/sqft
Mortar= Portland + lime mix; $0.50–$1/sqft
Labor= Masons $7–$10/sqft; Northeast/CA masonry: +20–30%
Support= Brick ledge / steel angle iron for full veneer: $500–$2,500
Tear-off= $0.50–$2/sqft depending on existing siding

Brick Siding Costs in 2026: What Buyers Actually Pay

1

What Brick Siding Actually Costs in 2026

Brick siding splits into three tiers that price and install very differently. Thin brick veneer is 1/2–1″ deep and glued or mortared to a cement-board substrate like tile — retrofit-friendly, no foundation changes, $8–$18/sqft installed. Full brick veneer is 3-5/8″ deep, installed with an air gap behind, and requires either a brick ledge built into the foundation or steel angle iron retrofit to carry the weight — $13–$22/sqft installed. Solid brick masonry is load-bearing brick that serves as both siding and structure, $14–$30/sqft, and is only built during original construction because it cannot be retrofitted to a framed home.

On a typical 2,000 sqft single-family home, thin brick totals $16,000–$36,000, full brick $26,000–$44,000, and solid brick masonry $30,000–$60,000+. The biggest mistake homeowners make is not understanding which tier applies to their project — a remodel on an existing framed house cannot use solid masonry, so the only choice is thin vs full veneer. The table below shows installed pricing by tier and region.

Installed cost per square foot by brick type and region, 2026. Source: Homewyse, Angi, HomeGuide.
Veneer TypeSouth ($/sqft)Midwest ($/sqft)NE / West Coast ($/sqft)
Thin brick veneer81116.5
Full brick veneer131722
Solid brick masonry152028

Brick homes command a 4–6% resale premium and can cut homeowners insurance 5–10% in hail, fire, and tornado zones. On a $400,000 home that is $16,000–$24,000 in resale signal plus $150–$300/year in insurance savings — meaningful offsets to the upfront premium over siding.

2

Thin vs Full Veneer vs Solid Brick: Which Fits Your Project

Which brick tier is right depends on whether you are building new, retrofitting siding, or re-cladding an existing brick home. Thin brick veneer is the retrofit answer because it does not require a brick ledge or structural support — it installs over cement board like tile. Full brick veneer delivers the classic look but needs either an original-construction brick ledge or a $1,500–$3,000 steel angle iron retrofit to carry the 40 lb/sqft weight. Solid brick masonry is only an option on new construction because retrofitting load-bearing brick onto a framed structure is not technically or economically feasible.

The table below compares the three options head-to-head. For most existing homes undergoing a siding refresh, the choice is thin vs full — a $20,000–$30,000 delta on a 2,000 sqft home for the deeper authentic brick look versus the retrofit-simplicity of thin.

Comparison of the three brick siding tiers, 2026.
SpecThin VeneerFull VeneerSolid Masonry
Depth1/2–1″3-5/8″8–12″+
Installed ($/sqft)$8–$18$13–$22$14–$30
FoundationNone neededBrick ledge or angle ironFull footing
Retrofittable?YesWith ledger workNo
2,000 sqft total$16K–$36K$26K–$44K$30K–$60K+
  • Existing framed home, modest budget: thin brick veneer is the only practical option
  • Existing framed home, traditional look: full veneer with angle-iron retrofit
  • New construction: full veneer if classic aesthetic matters; solid masonry only on custom builds
  • Re-clad over existing brick: thin brick or manufactured stone, never stacked veneer
  • Wind-load or seismic zones: require engineer-specified anchor schedule regardless of tier
3

Hidden Costs: Ledger, Angle Iron, and Flashing

Full brick veneer on an existing framed home requires either a built-in brick ledge (usually only present on original construction) or a steel angle iron retrofit to carry the weight. An angle iron retrofit runs $1,500–$3,000 for a typical 2-story home and involves bolting heavy-gauge steel to the rim joist to support the brick course. This line is missing from most competitor cost guides because it pushes homeowners away from full veneer toward thinner options.

Flashing and weep holes are the other stealth line items. Every window, door, and foundation course needs proper flashing that directs water out of the air cavity between brick and sheathing. Weep holes — open mortar joints every 24–32″ along the bottom course — let water drain out. Skip either detail and water pools inside the wall, which is the number one cause of brick veneer failure. The list below captures all the line items that should appear in a full-veneer quote.

Never accept a full-veneer brick quote that does not itemize angle iron (if retrofit), flashing, weep holes, and lintels as discrete lines. A $2,500 angle iron retrofit hidden inside “materials” is the most common way brick bids become non-comparable.

  • Brick ledge retrofit (angle iron bolted to rim joist): $1,500–$3,000 per typical 2-story
  • Steel lintels above each window and door: $75–$200 each, typically 12–20 per home
  • Weep holes: open mortar joints every 24–32″ along bottom course — free but critical
  • Flashing at windows, doors, and foundation course: $2–$6 per linear foot
  • Caulking and control joints: $2–$4 per linear foot to accommodate expansion
  • Mortar type (N for normal, S for high-wind or seismic): spec in writing
  • Brick SKU: name the exact manufacturer and product code — “red brick” is not a spec
4

Brick Cost by Region

Brick pricing varies 25–40% by region. The South sits at the bottom of the range because proximity to Southern clay producers (Ohio, Alabama, Tennessee) keeps material cost low and regional masonry trade density keeps labor competitive — full veneer at $13/sqft installed. The Midwest is the traditional brick heartland at $17/sqft installed for full veneer. Northeast and West Coast markets run $22/sqft due to tight masonry labor and longer material supply chains. Metros within any region add another 10–20% over surrounding rural counties.

Hail, tornado, and fire corridor states see slightly different pricing dynamics. Texas, Oklahoma, Missouri, and the Plains command a modest premium because brick is spec’d heavily in those markets for storm resistance — contractor capacity is pushed. The 5–10% insurance discount for brick in those states partially offsets the upfront pricing pressure.

Typical 2,000 sqft brick cost by tier$0$15k$30k$45k$60kThin$26,000Full veneer$35,000Solid$45,000Typical mid-range 2,000 sqft home. Source: Angi, HomeGuide.
Full-home brick siding cost on a 2,000 sqft single-family home by region, 2026.
RegionFull Veneer 2,000 sqftThin Veneer 2,000 sqft
South$26,000–$34,000$16,000–$22,000
Midwest$34,000–$40,000$22,000–$28,000
Northeast / West Coast$40,000–$48,000$28,000–$36,000
5

Red Flags When Hiring a Brick Siding Contractor

Brick is not DIY-fixable. A spalling, effloresced, or improperly flashed brick wall costs $5,000–$20,000 to remediate and often requires removal of significant sections. That makes upfront contractor vetting critical. Verify active masonry-specific license (a generic GC license is not enough in most states), general liability, and workers’ comp. Ask to see 5+ year old work in person — brick failures like spalling and efflorescence show slowly and only become visible after several freeze-thaw cycles.

Deposit rules are similar to other siding trades but with a brick-specific nuance: material deposits of 25–30% are acceptable once the brick shipment is ordered because brick is pallet-priced and supplier terms often require payment before delivery. Anything over 30% should trigger caution; 50%+ is a scam pattern regardless of the “brick truck has to be booked” excuse. Demand written scope that names the exact brick SKU, mortar type (Type N for normal, Type S for high-wind or seismic zones), weep hole spacing, and flashing detail at every window and foundation course.

Any masonry quote should name five things in writing: brick SKU, mortar type (N or S), weep hole spacing, flashing detail, and lintel spec above openings. A contract without those five lines is an under-specified contract that will hide cost-cutting substitutions until the wall starts failing in year 4.

  • Accepting a quote without naming the brick SKU — allows substitution to cheaper brick
  • Hiring a general GC without masonry-specific license verification
  • Skipping the brick ledge or angle iron support cost on full veneer retrofit
  • Ignoring flashing and weep holes — the #1 cause of brick veneer water damage
  • Using Type N mortar where Type S is required (wind or seismic zones)
  • Paying 50%+ deposit because “the brick truck has to be booked”
  • Not asking to see 5+ year old work — brick failures hide for 3–5 years

Related Calculators

Siding Material Calculator

DIY counterpart — count brick quantity and mortar bags for a small accent wall or chimney project.

Siding Installation Cost Calculator

All-material siding cost estimator — compare brick against vinyl, fiber cement, and wood on the same footprint.

Fiber Cement Siding Cost

Compare against HardiePlank — typically 40–60% cheaper with similar resale ROI.

Roofing Cost Calculator

Bundle brick + roofing replacement in one project for a 5–10% contractor discount on combined labor mobilization.

Stone Veneer Installation Cost Calculator

Estimate 2026 stone veneer installation cost by square footage, stone type, and region. Manufactured $15-$25/sqft; natural stone $25-$45/sqft installed.

Vinyl Siding Cost Calculator \u2014 2026 Installed Estimator

Estimate 2026 vinyl siding cost by home size, grade, and region. Builder, standard, premium, and insulated vinyl ranges $4 to $12 per sq ft installed.

Related Resources

How Much Does a Brick Wall Cost in 2026? (National Averages & Real Pricing)

Read our guide

How Much Does Siding Cost in 2026? (Vinyl, Fiber Cement & Wood Pricing)

Read our guide

How Much Does Stucco Cost in 2026? (New Installation & Repair Pricing)

Read our guide

Siding Material Calculator

Siding Installation Cost

Vinyl Siding Cost

Fiber Cement Siding Cost

Wood Siding Cost

Explore Construction Calculators

Price materials and labor for siding, roofing, decks, concrete, and more remodeling projects.

View All Construction Calculators

Last Updated: Apr 19, 2026

This calculator is provided for informational and educational purposes only. Results are estimates and should not be considered professional financial, medical, legal, or other advice. Always consult a qualified professional before making important decisions. UseCalcPro is not responsible for any actions taken based on calculator results.

UseCalcPro
FinanceHealthMath

© 2026 UseCalcPro