1Standard 10x10 Kitchen (semi-custom)
Inputs
Result
12 + 15 + (2 x 2) = 31 lf at $200/lf + $65/lf install = $8,215.
Total Linear Feet
31 lf
Hardware
36 hinges
Material
$6,200
Total
$8,215
Total Cabinets
31
linear feet
Hinges
36
Drawer Slides
8 pairs
Knobs/Pulls
26
Plywood Sheets
4
Get free quotes from licensed contractors in your area
Showing results for your area
Inputs
Result
12 + 15 + (2 x 2) = 31 lf at $200/lf + $65/lf install = $8,215.
Inputs
Result
8 + 10 + 2 = 20 lf at $100/lf + $65/lf install = $3,300.
Measure each run of upper and lower cabinets separately in feet. Add the linear feet of upper cabs, lower cabs, and tall pantry/oven cabinets (each counts as about 2 linear feet) for the total.
Stock cabinets cost $75-$150 per linear foot, semi-custom $150-$300, and fully custom $400-$800+. These prices include the cabinet boxes and doors but typically exclude countertops and installation.
Standard cabinet doors need 2 hinges each. Doors over 40 inches tall need 3 hinges. A typical kitchen with 18-24 doors needs 36-48 hinges total.
Choose stock for budget renovations under $10,000, semi-custom for mid-range kitchens $15,000-$30,000, and custom for high-end projects over $30,000 where every inch of layout matters.
Read our guide
Read our guide
Read our guide
Explore countertop, backsplash, flooring, and paint calculators.
Last Updated: Mar 19, 2026
This calculator is provided for informational and educational purposes only. Results are estimates and should not be considered professional financial, medical, legal, or other advice. Always consult a qualified professional before making important decisions. UseCalcPro is not responsible for any actions taken based on calculator results.