Constructiongutterconstructioncost
Part 8 of 17 in the State Benchmarks series

Average Gutter Cost by State in 2026 (All 50 States Compared)

Published: 5 March 2026
Updated: 9 March 2026
7 min read
Average Gutter Cost by State in 2026 (All 50 States Compared)

The national average cost to install seamless aluminum gutters on a typical home (200 linear feet) in 2026 is approximately $3,000, but costs range from $1,200 in Mississippi to over $4,800 in Hawaii. Northeast and West Coast states run 15-30% above average due to higher labor rates, while southern and rural states come in 15-35% below.

I have estimated gutter projects across the mid-Atlantic for years, and the variable that makes the biggest difference beyond location is fascia condition. I have seen $2,500 gutter jobs turn into $4,500 jobs when the installer pulls off the old gutters and finds rotted fascia behind them. In older homes (pre-1990), budget an extra 20-30% for potential fascia repair. It is the hidden cost that nobody accounts for until the old gutters come down.

Use our Gutter Calculator to estimate gutter length and materials for your specific home.

Gutter installation cost comparison showing the 5 cheapest states (Mississippi $1,200 to Alabama $2,100) vs 5 most expensive states (Hawaii $4,800 to Connecticut $3,800) in 2026

All 50 States: Gutter Installation Cost Comparison

The table below shows estimated costs for 200 linear feet of seamless 5-inch aluminum gutters, professionally installed, including downspouts (6-8), end caps, corners, and hangers. Does NOT include fascia repair or gutter guards.

StateAvg. Cost (200 lin ft)Cost/lin ftLow RangeHigh Rangevs. National
Alabama$2,100$10.50$1,600$2,700-30%
Alaska$3,500$17.50$2,700$4,500+17%
Arizona$2,800$14.00$2,100$3,600-7%
Arkansas$1,800$9.00$1,400$2,300-40%
California$4,200$21.00$3,200$5,400+40%
Colorado$3,200$16.00$2,400$4,100+7%
Connecticut$3,800$19.00$2,900$4,900+27%
Delaware$3,000$15.00$2,300$3,8000%
Florida$2,800$14.00$2,100$3,600-7%
Georgia$2,400$12.00$1,800$3,100-20%
Hawaii$4,800$24.00$3,600$6,100+60%
Idaho$2,200$11.00$1,700$2,800-27%
Illinois$3,200$16.00$2,400$4,100+7%
Indiana$2,400$12.00$1,800$3,100-20%
Iowa$2,400$12.00$1,800$3,100-20%
Kansas$2,300$11.50$1,700$2,900-23%
Kentucky$2,100$10.50$1,600$2,700-30%
Louisiana$2,000$10.00$1,500$2,600-33%
Maine$2,900$14.50$2,200$3,700-3%
Maryland$3,300$16.50$2,500$4,200+10%
Massachusetts$3,900$19.50$3,000$5,000+30%
Michigan$2,700$13.50$2,100$3,500-10%
Minnesota$3,000$15.00$2,300$3,8000%
Mississippi$1,200$6.00$900$1,500-60%
Missouri$2,400$12.00$1,800$3,100-20%
Montana$2,300$11.50$1,700$2,900-23%
Nebraska$2,300$11.50$1,700$2,900-23%
Nevada$2,900$14.50$2,200$3,700-3%
New Hampshire$3,000$15.00$2,300$3,8000%
New Jersey$3,700$18.50$2,800$4,700+23%
New Mexico$2,200$11.00$1,700$2,800-27%
New York$4,000$20.00$3,000$5,100+33%
North Carolina$2,400$12.00$1,800$3,100-20%
North Dakota$2,100$10.50$1,600$2,700-30%
Ohio$2,600$13.00$2,000$3,300-13%
Oklahoma$2,100$10.50$1,600$2,700-30%
Oregon$3,300$16.50$2,500$4,200+10%
Pennsylvania$2,900$14.50$2,200$3,700-3%
Rhode Island$3,600$18.00$2,700$4,600+20%
South Carolina$2,200$11.00$1,700$2,800-27%
South Dakota$2,100$10.50$1,600$2,700-30%
Tennessee$2,300$11.50$1,700$2,900-23%
Texas$2,500$12.50$1,900$3,200-17%
Utah$2,500$12.50$1,900$3,200-17%
Vermont$2,900$14.50$2,200$3,700-3%
Virginia$2,900$14.50$2,200$3,700-3%
Washington$3,400$17.00$2,600$4,400+13%
West Virginia$1,700$8.50$1,300$2,200-43%
Wisconsin$2,700$13.50$2,100$3,500-10%
Wyoming$2,200$11.00$1,700$2,800-27%

Gutter Material Options and Cost Impact

MaterialNational Avg/lin ftvs. AluminumLifespan
Vinyl (sectional)$6 - $12-40%10-15 years
Aluminum seamless$10 - $20Baseline20-30 years
Steel$10 - $35+30%15-25 years
Copper$25 - $60+150%50-100 years
Zinc$20 - $45+100%40-80 years

Regional Breakdown

Most Affordable States (30-60% below average)

Mississippi ($6.00/lin ft), West Virginia ($8.50/lin ft), Arkansas ($9.00/lin ft), Louisiana ($10.00/lin ft), Alabama ($10.50/lin ft)

Most Expensive States (23-60% above average)

Hawaii ($24.00/lin ft), California ($21.00/lin ft), New York ($20.00/lin ft), Massachusetts ($19.50/lin ft), Connecticut ($19.00/lin ft)

Frequently Asked Questions

What state has the cheapest gutter installation?

Mississippi at $6.00 per linear foot ($1,200 for 200 linear feet). Low labor rates and competitive installer markets keep costs well below the national average. West Virginia ($8.50/lin ft) and Arkansas ($9.00/lin ft) are close behind.

How many linear feet of gutter does a typical house need?

The average home needs 150-250 linear feet of gutter. Measure the length of every roof edge where water runs off. A simple ranch may need 120-150 linear feet. A two-story colonial with multiple gable ends may need 200-300 linear feet.

Are seamless gutters worth the extra cost?

Yes -- seamless gutters cost 15-30% more than sectional but eliminate the #1 failure point: leaking seams. Sectional gutters have joints every 10 feet that eventually leak. Seamless gutters are formed on-site from a single piece of aluminum with no joints to fail.

How often do gutters need replacement?

Aluminum seamless gutters last 20-30 years. Vinyl: 10-15 years. Steel: 15-25 years. Copper: 50-100 years. Signs of needed replacement include persistent leaking, sagging, rust holes, paint peeling behind gutters (overflow damage), and water pooling at the foundation.

Do gutter guards save money long-term?

Yes -- gutter guards cost $4-$12/lin ft upfront but eliminate $150-$400/year in professional cleaning. Over 10 years, guards cost $800-$2,400 versus $3,000-$8,000 in cleaning. Micro-mesh is the most effective style, blocking even pine needles and roof grit.

Cost estimates derived from regional labor data, cost-of-living indices, and pricing reported by Angi, HomeGuide, This Old House, and LeafFilter. Prices reflect 2026 estimates and may vary by metro area.

Share this article:

This article is provided for informational and educational purposes only. Content should not be considered professional financial, medical, legal, or other advice. Always consult a qualified professional before making important decisions. UseCalcPro is not responsible for any actions taken based on the information in this article.

Related Articles